45 Caliber 1 Inch Bull Barrel, 27 Inch Finish Length
Description
45 Caliber Smokeless Muzzle Loader Barrel
Here is a 27-inch finish length barrel to fit the Encore frame. It is one inch diameter for the full length of the barrel, cut, crowned and bead blasted, ready to install on your frame. This barrel comes complete with the ORIGIONAL LARGE RIFLE MAGNUM PRIMER SYSTEM breech plug installed along with 25 primer modules that will practically last a lifetime if not lost. The barrel comes with a picatinny rail mounted to the barrel with 6 screws and moved forward 1 inch for more eye relief. The barrel also comes with two dovetail studs securely installed on the barrel for mounting the forearm. A 12 Gage Shot gun forearm will mount to this barrel without modifications or you can use a rifle or muzzle loader forearm with some slight modifications to the barrel channel.
The barrel blank is from Preferred barrels and it has a 1-20 twist.
This barrel weighs 5 Lbs, 4 Oz.
Other items you may need with this barrel is a Three piece ram rod with a knob and jag. The ram rod length you will need for this barrel would be the 26 inch rod, add the jag and that brings the total length to 28 inches. The ram rod, jags and knobs can be found here: https://hanksprecisiongunparts.com/c/ram-rods-and-loading-accessories
You may also need a sizing die, you will need to order the 45 caliber sizing die kit available here: https://hanksprecisiongunparts.com/c/bullet-resizing-dies